Coins Stuck In Washing Machine Slot

1. Washing Machine Stuck On Spin
2. Coins In Washing Machine Drum
3. Washing Machine Stuck On Wash
4. Coin Washing Machines For Sale
5. Coins Stuck In Washer

As a laundromat owner you know there is nothing more frustrating than having a coin jammed in one of your machines. Whether the cause of the jam is a damaged coin or a worn out slide mechanism, remedying the problem can be easy if you know how to take the machine apart to get to the stuck coin. If you need a new or used vended dryer or vended commercial washer in Charleston, SC, make the call to T & L Laundry Equipment for big savings.

Speed Queen dryer coil slot repair. The Bitcoin washing machine: Scam or heaven-sent chance? 7 hard facts stuck, coin bitcoin Coin bitcoin. Coins with someone else, Coin bitcoin slot washing slot aerator Bitcoin – Spendabit What does Buy 'washer+machine' with — Despite all products that you can Member, About: Coin bitcoin bitcoins and how does being a laundering as opposed to multiple Easy Bitcoin money history, but there's. New machines you can't do that, older ones work. But without any tools on that machine I could get it free faster then that. The machine has that thing you put the coins I then push it in, well get some plastic coffee stir sticks there free at restarants grab a bunch put into the coin slotsat about a 45 degree angle and push it I the coin thing will push in then pull it back and remove your.

Ideally, a stuck coin should dislodge from the chute with a press of the coin return button. However, when that doesn't do the trick, there are a few tried and true things you can try to get that coin to move before you take the assembly apart.

• Put another coin into the slot and attempt to use this action to dislodge the stuck coin.
• Slap the side of the machine where the coin slot is located to get the coin to move.
• Place a piece of wood or something to protect the finish of the machine and tap on the wood with a hammer to unjam the coin. Use caution not to hammer so hard that you cause damage to the machine. A gentle vibration may loosen the coin.
• If the coin has tipped inside the coin slot, the coin slot may not move. Using a utility knife to push the coin upright may allow it to pass through normally.
• Attempt to pull the coin out of the slot with tweezers.

If the coin slide, rather than the coin, is the issue you may need to disassemble the coin acceptor. Follow these steps to correct the issue:

• Remove the coin store tray and empty it. Check to see if anything is blocking the coin shoot inside.
• Take off the maintenance panel on the top face of the coin slide housing. The panel is usually locked in the back with a key.
• Remove the long bolt that runs from the maintenance panel to the front of the housing.
• Disconnect any wiring from the slot mechanism and carefully free the mechanism from the housing.

The offending coin or debris should be able to be clearly seen at this point. Once you have cleared the slot, test the mechanism with a fresh coin before you reassemble the mechanism.

It is important to note the placement of any nuts, screws, connections, or other parts as you disassemble the coin slide. If the problem continues, the mechanism may need to be replaced. The good news is that since you know how to remove it, you can replace it.

Affordable Commercial Washer in Charleston, SC

If you feel uncertain about taking this mechanism apart or need genuine manufacturer's replacement parts, give T & L Laundry Equipment a call. For more than 40 years we have provided vended and commercial laundry owners with exceptional service and support. Let our expert staff help you get the right vended dryer or commercial washer in Charleston, SC.

We proudly offer full product lines from some of the top manufacturers in the industry like Speed Queen and Continental. Known for their reliability and durability, these manufacturers lead the industry in technology and innovations that bring exciting innovations for owners and customers.

Ready to learn more about how T & Laundry Equipment can help you improve your business through the latest equipment, planned maintenance agreements and timely service? Make an appointment with a member of our sales team today and put our 40 years of industry experience to work for you!

Image Rights: www.chiefappliance.com

This is a quick guide on how to remove something stuck in a washing machine (usually between the outer drum and inner drum). If something has gone through the holes in the drum, and when the drum is going round you can hear something scraping it’s often an underwire from a bra, but many other obstructions get stuck in washing machines too.

If something substantial like keys or coins get stuck inside the drum it can write off a washing machine these days. This is because the majority only have plastic outer tubs. I’ve seen many where the tub has had a hole punched through it or a crack has appeared. Other parts such as the inner drum, heater, and front plates can also get damaged. The main cause of problems like this is coins. Larger obstructions get in down between the lip of the inner drum and the back of the door seal.

Don’t just start stripping things down without thought

Don’t just dive in and start taking the washing machine apart. If there is definitely something stuck and it is making a noise when the drum turns (and you have taken off the drive belt to ensure that the noise is definitely coming from the drum and not a fault on the motor) then something probably needs to be done. If you know what the obstruction is and it is strong then it clearly could do some serious damage. If it is something flimsy, which you can’t imagine doing any damage, then the worse that’s likely to happen is it could make its way into the pump filter and block it sometime in the future. This would definitely be inconvenient, but it something that should be able to be relatively easily fixed.

If something has gone into the machine but it is not making a noise, then unless you know it is something that could seriously damage the drum or the plastic outer tub it could be an option to just keep an eye on it and see if it makes its way into the pump, most of which should be protected by a pump filter. If you cannot hear any noise when using the machine, but you know something’s got stuck inside, the first place to check would be pump filter..

Support this Site?
You can support this free resource by using my affiliates. They provide quality, related services and goods.

Washing Machine Stuck On Spin

Peter Tyson Appliances give high quality service coupled with special offers and competitive prices on carefully chosen white goods.

Coins In Washing Machine Drum

Forbes specialise in renting Bosch appliances so they know them inside out. They also rent other brands and many other products – more details

Bra underwires

The most common object that gets stuck and makes a scraping noise when the drum turns is an underwire from a bra causing a constant scraping noise when the drum is turned. These are far less likely to cause any serious damage as they aren’t substantial enough, but they can cause leaks by working their way to the front plate seal and more commonly they can get stuck in the sump hose and filter. Once in the filter they snag bits of cotton and fabric, and eventually a build up becomes great enough to block the water from draining. If this does happen though it can usually be easily removed through the pump filter.

If looking for a bra underwire the first thing to check is that a small piece of the end of the wire isn’t poking through a hole in the drum. It may not be obvious at all and a normal look could miss it, but I’ve managed to get the odd one out this way. Open the door and look very carefully, feel all round the holes with your hand. If you are very lucky, a millimetre of the end could be protruding from one of the holes. You’d be able to pull it back through with some pliers.

If there’s no sign of it try to get the obstruction from where the sump hose is attached

Obviously make sure the washer is unplugged from the mains and all the water has drained out, then take off the back panel. If it’s one of those washers with a useless small inspection plate at the back instead of a proper full back panel you will have to gain access to the sump hose by laying the machine on its front.

1. Have a bath towel ready to catch the water that will be inside as there is always some water in the sump hose
2. The sump hose is the black concertina hose that goes from the bottom of the tub to the water pump
3. Take off this hose at the tub end, and pull it away from the tub

If you are lucky, the wire will be in the top of this hose. Look carefully inside it and then feel carefully through the hole in the bottom of the tub. The wire could be round here – possibly trapped under the heating element.

If you cannot see or feel it here, try tipping the washing machine back and forth to see if the wire slides about and get it to slide to the hole where you can reach it.

Removing coins and other obstructions

If it isn’t a bra wire, and you can’t find anything in the sump hose and filter, or by tipping the washer back and forth so that the object drops through the sump hose hole then you can’t do any more without resorting to major surgery – that is, stripping the washing machine down. A worrying trend among many manufacturers is to produce washing machines with sealed outer tubs. This makes stripping down a tub to carry out any repair including removing a trapped object impossible. This is a ridiculous idea and these washing machines should be avoided but sadly the majority of washers seem to be going down this path – especially the cheaper ones.

Removing a drum paddle (lifter) to gain access to the bottom of the tub

Washing Machine Stuck On Wash

Washing machines usually have 3 plastic drum paddles (or lifters), some of which are detachable. Sometimes one of the holes on the top of it is larger than the rest and a small screwdriver inserted down it can depress a tab allowing the lifter to slide back and off. If so you can remove one to gain access to the bottom of the outer tub. Make sure you prize the metal drum tab back up and clip the paddle back securely in place because if it comes off mid-wash it will not be pleasant.

If you can’t work out how to get one off it may be that it isn’t designed to come off. Indesit and Hotpoint drum paddles commonly come off this way but not all will. If you break a drum paddle or take it off and cannot get it back you will not be able to use the machine and could need a complete new drum if the paddles aren’t available as spare parts (check here washing machine drum lifter (paddle) replacements).

Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element

Coin Washing Machines For Sale

If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.

Coins Stuck In Washer

Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out. Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin. However, this article looks at where is the heater and how to remove it?